Auto Dn; Disa Dn - Nortel ICS Install Manual

460 / System prgrming

Auto DN

For calls answered without DISA, no password is required to
access the Norstar system. The Class of Service (COS) that
applies to the call is determined by the COS for the trunk on
which the user is calling.
1. Use CHANGE and the dialpad to enter the digits to be
received from the auto-answer trunk.
2. Press CLR to set the Auto DN back to None.
Tips -
Rec'd # length specified in System prgming.The Auto DN
is cleared if the Received number length is changed.
The Auto DN cannot be the same as a line pool access code or
a destination code.

DISA DN

For calls answered with DISA, the system presents a stuttered
dial tone to prompt a caller to enter a valid password. The
Class of Service (COS) that applies to the call is determined by
this COS password.
Once a remote user is on the Norstar system, the DISA DN can
be used to change the existing Class of Service. This gives you
greater flexibility when you create access privileges. For
example, you may want to have a shared DN for remote access
and separate COS passwords with different dialing out
privileges for individuals.
Use CHANGE and the dialpad to enter the digits to be received
from the auto-answer trunk.
Press CLR to set the DISA DN to None.
Modular ICS 7.1 Installer Guide
The length of the Auto DN is the same as the
Installer password required
Installer password required
N0130943 02