542 / System test log
Checking the current alarm
If you want to quickly check the highest severity alarm before
viewing all the log items, start with the display showing Items
in log:.
1. Press ALARM.
The display shows an alarm code if there is a current alarm.
If there is no current alarm, ALARM does not appear on the
display.
2. Press OK to return to Items in log:.
All alarms are recorded as items in the System test log.
Checking when each item occurred
Start with any display showing a log item:
1. Press TIME. The display briefly shows the date and time.
2. Write the date and time on the System test log record.
Checking consecutive repetitions of an event or alarm
If REPEAT appears under a display showing a log item:
1. Press REPEAT.
The display shows the number of consecutive times the
event or alarm occurred.
Modular ICS 7.1 Installer Guide
N0130943 02