Telecommunication Registration - Nortel ICS Install Manual

24 / Telecommunication Registration

Telecommunication Registration
This equipment meets all applicable requirements of both
Industry Canada and US Federal Communications Commission
and has been registered under files Industry Canada 332D-
5980A and FCC US: AB6KF15B20705 (key system), US:
AB6MF15B20706 (hybrid system), and US: AB6PF15B23740
(PBX system). Connection of this telephone system to the
nationwide telecommunications network is made through a
standard network interface jack that you can order from your
local telecommunications company. This type of customer-
provided equipment cannot be used on party lines or coin lines.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an authorized
maintenance facility designated by the supplier. Any repairs or
alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause
to request the user to disconnect the equipment. Users should
ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal
metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.
Modular ICS 7.1 Installer Guide
CAUTION: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority, or electrician.
N0130943 02