Capabilities - Nortel ICS Install Manual

causing the network to present an incorrect CLID to the
called party.
Note: You can program PRI lines to block outgoing name and
OLI. Refer to Send Name Display (PRI) on page 525.

Capabilities

Settings that control how the system interacts with individual
telephones and the calls they receive are found under
Capabilities. The following table lists these headings. The
default settings are shown in bold.
Setting
Fwd no answer
Fwd to
Forward
delay
Fwd on busy
DND on Busy
Handsfree
HF answerback
Pickup grp
Page zone
Paging
D-Dial
N0130943 02
Description
Redirect all incoming calls when this
telephone does not answer.
Select the number of rings before an
unanswered call is forwarded.
Redirect all incoming calls when this
telephone is busy with another call.
Select whether an incoming call rings if
the user is already on another call.
Select whether handsfree will be
available to a telephone.
Select whether a user can automatically
answer a voice call without lifting the
receiver or pressing the handsfree/mute
button.
Assign this telephone to a pickup group.
Assign this telephone to page zone.
Select whether paging announcements
can be made from this telephone.
Select whether you can call the Direct-
dial telephone from this telephone using
the Direct-dial digit.
Terminals&Sets / 345
Options
Enter DN
None
2, 3, 4, 6, 10
Enter DN
None
Y, N
Auto, Std
(Standard),
None
Y, N
None, 1 to 9
None, 1 to 6
Y, N
Set1 to Set5,
None
Modular ICS 7.1 Installer Guide