Auxiliary Ringer - Nortel ICS Install Manual

Auxiliary ringer

1. If the auxiliary ringer is used for Schedules (Night,
Evening, or Lunch service), ensure that Schedules is
activated from the control telephone.
2. Check the wiring between the auxiliary ringer generator
and the ringing device. Refer to the auxiliary ringer wiring
chart.
3. Check the wiring between the auxiliary ringer generator
and the distribution block:
Auxiliary ringer wiring
Auxiliary ring (Make)
Auxiliary ring (Common)
4. Ensure that the auxiliary ringer contacts are operating
properly by checking with an ohmmeter across the
auxiliary ringer pin contacts listed above.
5. Check that the auxiliary ringer pin contacts are
programmed to operate in conjunction with any or all of
the features in the auxiliary ringer programming chart
shown below.
Auxiliary ringer programming
Auxiliary ringer
Auxiliary ringer
Schedules
The current capacity of the Norstar relay contacts is
50 mA DC. They are designed to operate with the auxiliary
ringer generator, or equivalent.
N0130943 02
Feature
Feature
Terminals&Sets
Lines
Services
Problems with optional equipment / 607
44 (Yellow-Brown)
19 (Brown-Yellow)
Programmed in
Pin
Modular ICS 7.1 Installer Guide