System Coordinator Programming; Admin/Basic Programming - Nortel ICS Install Manual

appropriate software code has been entered, for instance
Network Services requires the PRI and MCDN software
codes. Other settings will not appear unless the appropriate
cards or trunks are assigned. CbC headings, for instance, do
not appear unless the NI-2 protocol is used on the DTI trunk
card.
Light gray areas are only available with MICS-XC software.
These headings provide programming access for the
Companion wireless setup.

System Coordinator programming

Entry code: ≤••Ç؈ÏÈÌ (**266344)
Default System Coordinator password: ÅΘȈ
(23646)
Terminals&Sets
Capabilities
Name
User prefernces
Restrictions
Telco features
Lines
Name
*These prompts only appear with XC software for Companion programming.

Admin/Basic programming

User code: ≤••Ë͉ (**8737)
N0130943 02
Programming overview / 307
Services
Ringing service
Restrn service
Routing service
Sys speed dial
Passwords
Call log pswds
Progrming pswds
Reg. pswd*
Hospitality
Time&Date
System prgrming
Hunt Groups
Companion*
BusName
Hospitality
Modular ICS 7.1 Installer Guide