340 / Terminals&Sets
•
Lines from multiple DTI cards (PRI) can belong to the
same pool if they are configured with the same protocol.
PRI lines are assigned to pools with the Line type setting
•
under Lines programming.
Prime line
This setting assigns a prime line to the telephone. A prime line
is the first line that is automatically selected when the handset
is lifted.
Press CHANGE to select one of these settings: None,
Pool (A to O), or I/C (intercom). Only assigned lines and line
pools appear.
PRI pools are not valid selections for a Prime line.
Tips -
assignment of a prime telephone.
Modular ICS 7.1 Installer Guide
An assigned prime line is not associated with the
• An external line must be assigned to the telephone in
Line assignment before it can be assigned as the prime
line to the telephone.
• A line pool must be assigned to the telephone in line pool
access before a line pool can be assigned as the prime
line to the telephone.
• A target line cannot be a prime line for a telephone
because it is incoming-only.
• A DID line should not be assigned as the prime line for
a telephone. If assigned, it is treated as if no prime line
has been assigned. The message Select a line appears
when the receiver is lifted.
N0130943 02