Nortel ICS Install Manual page 485

Network Services / 485
Selective Line Redirection
Selective Line Redirection (SLR), also referred to as Line
Redirection, is enhanced for use with digital lines and operates
in conjunction with NCD.
Diversion by SLR takes precedence over diversion by CFAC.
An SLR line cannot be diverted by CFAC. If the call arrives
on an extension with SLR programmed, a ring splash will
sound (if programmed).
For information on SLR restrictions refer to Malicious call
identification (MCID) on page 486. For information on
redirecting lines see Line Redirection in the Modular ICS
System Coordinator Guide.
Programming Extensions
The User Interface for programming NCD is the same as for
ECF.
Different types of Call Forward are available depending on the
extension being programmed. Programming an extension to
forward calls externally requires the user to enter a destination
code or line pool number, in addition to the external phone
number. Therefore, care should be taken to identify your
network line types and record the available codes and line
pools.
Enhanced Caller ID
When a telephone which has Call Line Identifier (CLID)
active receives a redirected call due to NCD, the user will see
the DN for the Calling Number. This is followed by an arrow
icon (>) and the redirecting number. This is displayed for as
long as the call is active (alerting or answered) at that
telephone.
N0130943 02 Modular ICS 7.1 Installer Guide