Remote Pkg; Call Log Pswds - Nortel ICS Install Manual

414 / Passwords

Remote pkg

Remote pkg allows you to assign a specific remote access
package to a COS password.
The remote access package associated with the COS password
replaces any normally-applicable remote access package.
Use CHANGE and the dialpad to program the two-digit remote
package.
The default setting (None), means that any normally-
applicable remote access package still applies.

Call log pswds

This setting allows you to override any Call log password
programmed with the Call log feature, and resets it to None.
This feature is used when someone forgets a password.
1. Press ≠.
2. Enter the DN of the telephone.
3. Press ≠.
4. Press CLR to clear the programmed password.
Tips -
log Password feature. Refer to the Telephone Feature Card or
the Modular ICS 7.1 System Coordinator Guide for more
information.
Modular ICS 7.1 Installer Guide
You program a Call log password using the Call
N0130943 02