Break-In - Nortel ICS Install Manual

Nortel norstar ics software: install guide
Hide thumbs Also See for ICS:
Table of Contents

Advertisement

164 / Private networking using PRI SL-1

Break-in

The Meridian attendant can break into an on-going call from a
telephone in the Norstar system, if these situations are valid:
Break-in can occur when these situations are valid:
Target Norstar telephone is busy but still has a free
intercom or line key.
There is no camped call on the target telephone.
DND busy is turned on, although the attendant can
override a busy signal, if it is turned off, by pressing the
BKI key.
Prime set is also busy, with no free key, and with DND
turned on.
Attendant capability (intrusion) is high (2), and higher than
either the target telephone or the caller the target telephone
owner is busy with.
A warning tone occurs for both parties on the call before the
actual break-in occurs.
The diagram below demonstrates the call path for a Meridian
attendant to break into a call between telephones in the Norstar
system.
Modular ICS 7.1 Installer Guide
N0130943 02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Modular ics 7.1

Table of Contents