Nortel ICS Install Manual page 232

Nortel norstar ics software: install guide
Hide thumbs Also See for ICS:
Table of Contents

Advertisement

232 / Installing the cartridges
LS/DS Global Analog Trunk Cartridges and CI Global
Analog Trunk Cartridges both support loop start external
lines.
The Digital trunk Interface (DTI) supports both digital T1
and PRI lines. The DTI card can be configured to support
ISDN PRI. Systems running Profile 1 or 4 can support 1
off-core DTI module.
The Loop Start Trunk Cartridge supports loop start
external lines.
The E&M Trunk Cartridge supports E&M lines and
provides direct inward system access (DISA).
The DID Trunk Cartridge supports direct inward dialing
lines.
The BRI-ST card supports ISDN BRI S or T reference
point loops.
The BRI-U2 and BRI-U4 cards support two or four ISDN
BRI U reference point loops, respectively.
The Analog Extension Module (AEM), also known as an
Analog Station Module (ASM), connects up to eight
standard analog devices through eight ports connected to
the CCU through a fibre cable link.
Modular ICS 7.1 Installer Guide
N0130943 02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Modular ics 7.1

Table of Contents