Nortel ICS Install Manual page 330
Nortel norstar ics software: install guide
Hide thumbs
Also See for ICS:
- Quick start manual (36 pages) ,
- Supplementary manual (6 pages) ,
- User manual (138 pages)
Table of Contents
Advertisement
330 / Startup programming
Changing the DN length
If you reduce the length of the directory numbers in
DN length in System prgrming, the starting DN number is
reset to the default value (221).
If you increase the length of directory numbers in DN length
in System prgrming, each increase in length places the digit
2 in front of any existing DN. For example, if DN 3444 was
increased to a length of 6, the new DN would be 223444.
If the new DNs clash with the direct-dial digit, park prefix, or
line pool codes or destination codes, those numbers are
overridden and set to None.
Do not disable or enable ports in Maintenance programming
during the first two minutes after Startup programming.
Modular ICS 7.1 Installer Guide
N0130943 02
Advertisement
Table of Contents
Troubleshooting
