Lines; Trunk/Line Data - Nortel ICS Install Manual

Lines

This chapter describes the settings that allow you to determine
how the lines coming in and going out of the system will be
assigned.
Lines, whether physical or virtual, are the connecting threads
that allow users access into and out of the Norstar system to the
public network or to other private networks.
Lines can be pooled so a number of telephones have access to
more available lines, or they can be assigned specifically to
one telephone. There are also a number of ways that a
telephone can be configured to access line pools and special
lines like tie lines and private network lines.

Trunk/Line data

Trunk data allows you to program settings for lines that affect
how Norstar communicates with other switches. These
settings also allow you to determine how lines, including
target lines, will be used in the Norstar system.
Some Trunk data settings may not appear on the display during
programming, depending on the type of trunk. Those that
appear for a given Trunk type are indicated in the following
table.
N0130943 02
Lines / 361
Installer password required
Modular ICS 7.1 Installer Guide