478 / System prgrming
Programming Hospitality Services
The Hospitality heading accesses the settings for the room and
alarm information.
With the display showing System prgming press '
until the display shows Hospitality.
Room/desk information
Use this setting to assign set DNs to a specific room.
1. At the Hospitality heading, press ≠.
Room/desk info displays.
2. Press '. Show set: displays.
3. Enter a room set number or press LIST and press
' until you find the DN of the set you want to
assign to a room.
4. Press ≠. Room #:None displays.
5. Press CHANGE and enter the room number, then press OK to
accept the change.
6. Repeat step 5 for all the sets you want to assign.
7. Press '. Adm pwd req'd:Y displays
8. Press CHANGE and choose Y or N, depending on your
security requirements.
Modular ICS 7.1 Installer Guide
N0130943 02