Bri Card; Loop; Type; Lines - Nortel ICS Install Manual

512 / Hardware

BRI card

Loop

The display shows the loops found on the BRI card.
Press ' to display the settings for individual loops on
a BRI card.

Type

Press CHANGE to select the loop type.
If the card type is BRI-ST, the loop type can be S, or T.
•
• If the card type is BRI-U2 or BRI-U4, the loop type can be
LT or NT.

Lines

There are two lines for each T or NT loop.
201
202
203
204
225 (profile 1, 3 and 4); 231 (profile 2)
226 (profile 1, 3 and 4); 232 (profile 2)
227 (profile 1, 3 and 4); 233 (profile 2)
228 (profile 1, 3 and 4); 234 (profile 2)
Modular ICS 7.1 Installer Guide
The BRI card must be disabled in
before this setting can be changed.
You can change the setting if the card has not yet been
installed in the ICS slot.
Loop
Installer password required
Module status
Default lines
001-002
003-004
005-006
007-008
031-032
033-034
035-036
037-038
N0130943 02