Viewing Your Programming Updates; Entering Numbers; Viewing Long Telephone Numbers - Nortel ICS Install Manual

314 / Programming tools

Viewing your programming updates

If any changes you made to programming have not taken effect
yet, you will see an UPDATE display button when you leave
programming. The display will show you how many
telephones have not been updated yet because the system is
busy with other programming or the telephone is in use.
Press DNs to see the specific telephones where programming
changes have not been updated. Items will disappear from the
list as they are updated, and UPDATE will disappear once all
changes are complete.

Entering numbers

Numbers are entered from the telephone dialpad. The
backspace display button may be used to edit the number.
A line number must always be entered as a three-digit number.
Line numbers from 10 to 99 must be entered with a leading
zero (line 020, for example). Similarly, line numbers less than
10 must be entered with two leading zeros (line 002, for
example).
Internal telephone numbers, also referred to as directory
numbers (DNs), can be from three to seven digits long. The
default DN length is three. The DN length can be changed in
programming.

Viewing long telephone numbers

External telephone numbers can be up to 24 digits, but the
telephone display is only 16 character spaces long. To see a
previously-programmed number that is longer than 16 digits,
do the following:
Begin, for example, with 123456789012345.... The display
shows only the first 15 digits. The three dots (...) at the end of
Modular ICS 7.1 Installer Guide N0130943 02