Schedule Names; Schedule Times - Nortel ICS Install Manual

Tips -
automatically for all external lines and telephones controlled
by a given control telephone, but you cannot combine
schedules. In other words, a service can only be active as
normal service or one of the six schedules at any one time. You
can have several schedules active, as long as they are using
different services.
The default control telephone for all lines and telephones is
221 (for systems with three-digit DNs).

Schedule names

The schedule name is shown on the display of the control
telephone when the schedule is turned on. It identifies the
active schedule.
Use ≠, ', and CHANGE and the dialpad to
program the name.
Tips -
only suggestions and may be changed to any other name.
A schedule name can be one to seven characters long. It is
recommended that you reserve certain schedules (4, 5, and 6)
exclusively for alternate call routing (Routing service).

Schedule times

Schedule start and stop times are set at times you are most
likely to want each service to be active.
Use ≠, ', and CHANGE and the dialpad to
program the start and stop times for each schedule, on each
day.
N0130943 02
A service can be turned on manually or
The default names of the six possible schedules are
Services / 383
Modular ICS 7.1 Installer Guide