Show Time - Nortel ICS Install Manual

Set filter: See Restriction filter.
Set lock (telephone lock): This
feature allows you to limit the number
of features that may be used or
programmed at a telephone. Full set
lock allows very few changes or
features, Partial set lock allows some
changes and features, and No set lock
allows any change to be made and any
feature to be used. Set lock is assigned
under Capabilities in Terminals and Sets
programming.
Set relocation: See Automatic
Telephone Relocation.
Show Time: ≤°‚‹
While on a call, accessing this feature
allows you to see the current date and
time on the Norstar telephone display.
Silent Monitoring
This feature allows a user with a two-
line display telephone that has been
designated as a supervisor telephone, to
monitor Hunt group calls from external
sources using ≤•¤fifi.
Software keys: A programming
section used to enable the optional
Remote monitoring feature. One setting
provides a System ID, which an installer
or system coordinator plus then uses to
request three password keys from the
Nortel Customer Response Center.
Once these three passwords have been
entered, the system will permit Remote
monitoring.
SPID (Service Profile Identifier):
A number that identifies devices
connected to an ISDN network. A
device may have more than one SPID
depending on the number of channels it
uses. SPIDs may be used to identify
terminal equipment to the ICS, or to the
service provider.
Startup programming: When a
Norstar system is first installed and
powered up, Startup programming must
N0130943 02
be performed before any programming
can be done. Startup initializes the
system programming to defaults.
Station: An individual telephone or
other Norstar device.
Station Auxiliary Power Supply
(SAPS): A device which provides
power to a Norstar telephone that is
connected more than 300 m (975 ft.) and
less than 1200 m (3900 ft.) from the
ICS, or to a CAP module.
Station Module: A module that
allows you to connect up to 16
additional telephone to your Norstar
system.
Station set test:
≤°‚fi
A series of diagnostic tests for these
components of a Norstar telephone:
display, buttons, handset, speaker, and
power.
System coordinator: The person
responsible for customizing the Norstar
system through programming and for
helping co-workers use the Norstar
system.
System coordinator password: A
one- to six-digit password that prevents
unauthorized access to programming.
The System coordinator password can
be assigned and changed in Passwords
programming.
System coordinator plus: A
system coordinator who also performs
technical and maintenance functions for
the Norstar system.
System coordinator plus
password: A one- to six-digit
password that prevents unauthorized
access to programming. The System
coordinator plus password can be
assigned and changed in Passwords
programming.
Modular ICS 7.1 Installer Guide
Glossary / 655