378 / Lines
Restrictions
Restrictions are used to prevent a user from accessing a line for
making certain kinds of calls. For example, users should not be
able to make long-distance calls on lines used exclusively for
local calling.
Restrn filters
Restriction filters are groups of dialing restrictions and dialing
overrides for external numbers or feature codes. By packing a
set of restrictions and overrides in one group, you can assign
them to a line in one step, as a single package.
You can make changes to restriction filters under both
Terminals&Sets, and Lines. Any changes will take effect
for any telephone, line, or line on a telephone, regardless of
where the programming was changed.
See the description and procedures in Restrictions on page
378.
Line restrns
Specify the filter to be applied to this line to restrict the
numbers that can be dialed on it. You can assign a different
restriction filter for normal service and for each of the six
schedules. See Services on page 381 for more information
about the schedules.
Use ≠, CHANGE and the dialpad to enter the number
of the restriction filter to be assigned as the line restriction for
each schedule.
Modular ICS 7.1 Installer Guide
N0130943 02