Configuring Media Settings - Intermec PA30 User Manual

Configuring Media Settings

PA30 Print Engine User's Manual
Chapter 4 — Configuring Print Engine and Media Settings
• Set the Label Constant to the value listed in the table.
Decrease or increase it for lighter or darker images respectively
until you are satisfied with the printout quality.
General Direct Transfer Print Settings
Label
Sensitivity Constant
Low 100
Standard 90
High 80
Ultra high 60
Note: Preprint and varnish decrease the sensitivity of direct
thermal media.
Follow the next procedure to configure media size and type
settings for the PA30.
To configure media size and type
1 From the menu, click Printer > Media. The Configuration
[Media] screen appears.
Maximum
Label Print Speed
Factor (ips)
40 100
40 150
40 200
40 225
75