Intermec PA30 User Manual page 112

Chapter 7 — Managing, Maintaining, and Troubleshooting the PA30
100
5 Enter trap address settings in the entry fields. For more
information, see the next table.
6 Click Submit Settings. The Configuration [SNMP] screen
appears with the trap address settings in the table.
7 Click Submit SNMP settings. The changes are saved.
SNMP Settings Descriptions
Setting
Read Community
Read/Write Community
Friendly Name
Authentication Failure
Trap
Trap Address Settings
Description
Specify a password for read-only access.
Default is .
public
Specify a password for read and write
access. Default is
private
User-friendly name for the trap.
Enable or disable an authentication failure
trap.
When the Authentication Failure Trap is
enabled, you can set these trap settings:
• Trap address
• Trap port
• Trap community
• Friendly name
• Trap enable status
PA30 Print Engine User's Manual
.