Managing The Pa30; Using The Web Shell - Intermec PA30 User Manual

Chapter 7 — Managing, Maintaining, and Troubleshooting the PA30

Managing the PA30

Using the Web Shell

94
This section describes ways to manage the PA30 remotely,
including:
• using the web browser interface to perform certain tasks also
found in the Intermec Shell startup program. For more
information, see the next section.
For more information on the Intermec Shell program, see
Chapter 6, "Using the Intermec Shell Program."
• using Wavelink Avalanche. For more information, see
Wavelink Avalanche" on page 98.
• using a Simple Network Management Protocol (SNMP)
station. For more information, see
Management Protocol" on page 99.
You can use the PA30 web browser interface to manage the PA30
from a desktop PC and perform these tasks:
• Feed a single label through the PA30.
• Reset the PA30 to its default settings.
• Reboot the PA30.
• Choose the active application.
• Set the default COM channel.
To use the web browser interface to print a test label or setup and
network information, see
Information" on page 96.
To manage the PA30 from the web shell
1 From the menu, click Printer > Web Shell. The
Configuration [Web Shell] screen appears:
"Using Simple Network
"Printing Test Labels and Setup
PA30 Print Engine User's Manual
"Using