About The Display; About The Keypad - Intermec PA30 User Manual

About the Display

About the Keypad

PA30 Print Engine User's Manual
The display shows status messages and information as you
operate the PA30.
PA30 Display: When the PA30 is in Operating mode, this text appears in the
display.
Use the keypad to operate the PA30 and to navigate through
menus and choose options when the PA30 is in Setup modeSetup
mode. The next table explains the functions for each key.
PA30 Keypad Descriptions
Key Description
Arrow keys Navigate between menus and options when the PA30 is
(F1-F4) in Setup mode. For more information, see Chapter 5,
"Using Setup Mode."
Shift key Toggles the arrow keys between Setup mode navigation
and function assignments in your application. If your
application does not use F1-F5 values, this key is
disabled.
Information Shows PA30 serial connection information, IP address,
key (F5) and USB port status in the display.
Print Print a label or pause during printing. After a label has
printed, press Print to print the label again.
Pause Toggle between printing and pausing a print job.
Setup Enter Setup mode to configure the PA30 using its
keypad and display. For more information, see Chapter
5, "Using Setup Mode."
Feed Advance the label stock by one label.
Enter When the PA30 is in Setup mode, enters a value or
setting and navigates to the next menu item.
Numeric Enter a numeric value for settings when the PA30 is in
keys Setup mode.
Chapter 1 — Learning About the PA30
3