Intermec PA30 User Manual page 65

PA30 Print Engine User's Manual
Chapter 3 — Configuring Communication Settings
2 Choose options from the drop-down lists and enter values in
the entry fields. For more information, see the next table.
3 Click Submit TCP/IP settings. The changes are saved.
TCP/IP Settings Descriptions
Setting Description
IP Selection Determines how the PA30 is assigned TCP/IP
parameters:
• DHCP: A DHCP server assigns TCP/IP
• BOOTP: A BOOTP server assigns TCP/IP
• DHCP+BOOTP: TCP/IP parameters are
• Manual: TCP/IP parameters, including IP
IP Address Specifies the IP address if TCP/IP parameters
are manually assigned, or shows the IP address
assigned by a DHCP or BOOTP server.
parameters.
parameters.
assigned by either a DHCP or BOOTP
server.
address, netmask, default router, and WINS
addresses, are set manually.
53