Changing The Standard I/O Port - Intermec PA30 User Manual

Changing the Standard I/O Port

PA30 Print Engine User's Manual
Chapter 3 — Configuring Communication Settings
3 Choose settings from the drop-down lists, or specify values in
the entry fields. For more information, see the next table.
4 Click Submit Setup. The settings are saved.
Serial Communication Settings
Setting Description
Baud Rate Baud rate for serial communications with a host
PC. Default is 9600.
Data Bits Number of bits defining a character. Default is 8.
Parity Default is None.
Stop Bits Number of bits defining the end of a character.
Default is 1.
RTS/CTS Enable or disable.
ENQ/ACK Enable or disable.
XON/XOFF Enable or disable.
Data to Host
XON/XOFF Enable or disable.
Data from Host
New Line New line character. Default is CR/LF.
Receive Buffer Receive buffer size in bytes. Default is 1024.
Transmit Buffer Transmit buffer size in bytes. Default is 1024.
Note: The PA30 can print a list of the current serial
communication settings. For more information, see
Test Labels and Setup Information" on page 96.
By default, the PA30 communicates with a host PC via the serial
port, also known as "uart1:". You can change the default I/O port
by using the web browser interface.
Note: You can also change the standard I/O port from the
Intermec Shell program. For more information, see
Intermec Shell" on page 88.
To change the default I/O port
1 From the menu, click Printer > Web Shell. The
Configuration [Web Shell] screen appears.
"Printing
"About
51