Loading Media - Intermec PA30 User Manual

Loading Media

PA30 Print Engine User's Manual
1 Autoexec.bat file stored on a memory card. The card must be
installed in the print engine before the print engine is turned
on.
2 Autoexec.bat file stored in the read/write portion of the print
engine permanent memory (device "/c").
3 Pup.bat file (Intermec Shell) in the read-only portion of the
print engine permanent memory (device "/rom").
For more information on memory cards, see
Card" on page 8.
1 Open the PA30 access door.
2 Turn the printhead lift lever counterclockwise to open the
printhead.
3 Turn the pinch roller lever counterclockwise to open the
pinch rollers.
Chapter 1 — Learning About the PA30
"Using a Memory
15