Intermec PA30 User Manual page 47

PA30 Print Engine User's Manual
Chapter 2 — Using the PA30 in an Applicator
3 Choose settings from the drop-down lists. For more
information, see the next table.
4 Click Submit Setup. The settings are saved.
Applicator Port Settings Descriptions
Setting Description
Status Enables or disables Applicator mode.
Style Select from I-Style, Z-Style, or S-Style. For more
information, see
Startprint Choose either Level or Pulse. For more information, see
"Startprint" on page 37.
Endprint Choose from:
• OFF
• Mode 1/Type 3
• Mode 2/Type 4
• Mode 3/Type 1
• Mode 4/Type 2
For more information, see
"Applicator Port Styles" on page 34.
"Endprint" on page 38.
35