Intermec PA30 User Manual page 71

PA30 Print Engine User's Manual
Chapter 3 — Configuring Communication Settings
The lower part of this screen includes the current wireless
channel, the signal strength and MAC address of the currently
connected access point, and the wireless region.
2 Enter values in the entry fields, or choose values from the
drop-down lists. For help, see the next table.
3 Click Submit 802.11 Settings. The changes are saved.
Wireless LAN Settings Descriptions
Setting
SSID
WEP key 1 - 4
Active WEP key
Wi-Fi Protected
Access (WPA)
Description
Name of the network you want the PA30 to
connect to. Leave this field blank if you want
the PA30 to connect to any network.
Values for up to 4 WEP keys:
• For WEP 64, enter a string of five ASCII
characters or hex pairs.
• For WEP 128, enter a string of 13 ASCII
characters or hex pairs.
To enter a WEP key value in hex notation,
precede the hex pairs with "0x".
Sets the active WEP key for the PA30.
Turns WPA on or off.
59