Intermec PA30 User Manual page 107

Chapter 7 — Managing, Maintaining, and Troubleshooting the PA30
PA30 Print Engine User's Manual
2 Choose an option:
• To feed a single label through the printer, click Testfeed.
• To check the ribbon sensor (if installed), click Ribbon
sensor.
• To restore all default settings, click Default Setup.
• To reboot the PA30, click Reboot.
• To change the active application, choose an option from
the Application drop-down list. If you have a custom
application in the printer memory, you can choose it from
this list. For more information, see
on page 14.
• To change the standard I/O port, choose an option from
the Standard I/O drop-down list:
• auto - The PA30 checks possible I/O ports and uses
the port with the best connection.
• uart1: - serial port
• net1: - network interface (Ethernet or wireless)
• usb1: - USB port
3 Click Submit setup. The changes are saved.
"About Startup Files"
95