About Media Settings; Media Size Settings - Intermec PA30 User Manual

About Media Settings

Media Size Settings

PA30 Print Engine User's Manual
Chapter 4 — Configuring Print Engine and Media Settings
2 Choose an option:
• Click SMTP settings from DHCP if you want the
DHCP server to assign SMTP values.
• Click Manual settings to configure the mail server and
port manually, and then enter those values in the Mail
Server and Port entry fields.
3 (Optional) Enter mail address information in the From
address and To address entry fields.
4 Click Submit Mail settings. The changes are saved. You can
also click Submit & Send test mail to send a test mail
message to confirm your settings are working properly.
These settings define the size and type of media you are using in
the PA30. This section explains media size and media type
settings. For best performance and print quality, make sure you
have configured these settings correctly.
To configure media settings, see
on page 75.
The media size settings specify a "print window" inside which the
label is printed. Any object or field extending outside the print
window in any direction is clipped or causes a "field out of label"
error condition. For more information, see the Fingerprint
programmer's reference manual.
"Configuring Media Settings"
69