Xstart - Intermec PA30 User Manual

Chapter 4 — Configuring Print Engine and Media Settings
Media size
25 - 120 mm (1.0 - 4.72 in)
Length
Origin
X-start
Dot #0
70
Printable area
max. 112 mm (4.41 in)
Print window
Width
Feed direction
Print Window Dimensions: This illustration shows the relationship of the
Xstart, Width, and Length settings to the media size and printable area.

Xstart

Specifies the position of the origin along the dots on the
printhead.
The default X-start value prevents printing outside labels when
the liner is slightly wider than the labels. If you want to maximize
the print width, reset the X-start value to 0.
By increasing the value for the X-start parameter, the origin will
be moved outwards, away from the inner edge of the media path.
In other words, the larger X-start value, the wider inner margin
and the less available print width.
Dot #896 (203 dpi printhead)
Dot #1323 (300 dpi printhead)
PA30 Print Engine User's Manual