Intermec PA30 User Manual page 29

PA30 Print Engine User's Manual
8 Pull out about 40 cm (15 in) of media and remove the labels
from the liner.
9 Route the liner around the tear bar and through the pinch
roller mechanism.
10 Secure the liner to the takeup hub and rotate the hub to take
up slack.
Media Route: This illustration of a typical applicator shows the media
path through the PA30.
11 Turn the printhead lift lever clockwise to close the printhead.
12 Turn the pinch roller lever clockwise to close the pinch rollers.
Chapter 1 — Learning About the PA30
Media
Takeup roll
17