Using Simple Network Management Protocol - Intermec PA30 User Manual

Chapter 7 — Managing, Maintaining, and Troubleshooting the PA30

Using Simple Network Management Protocol

PA30 Print Engine User's Manual
You can access the PA30 from a Simple Network Management
Protocol (SNMP) station. Contact your Intermec representative
if you need to obtain a copy of the management information base
(MIB).
Before you can use an SNMP station, you need to define the
PA30 community strings.
To configure SNMP settings
1 Open a web browser interface to the PA30. For help, see
"Using the Web Browser Interface" on page 30.
2 From the menu, click Network Admin > SNMP. The
Configuration [SNMP] screen appears.
3 Enter SNMP settings in the entry fields and (optional) choose
Enable or Disable from the Authentication Failure Trap
drop-down list. For more information, see the next table.
4 (Optional) To set a trap address, click Add. The Trap Address
Settings screen appears.
To delete a trap address, click the button next to the address
and then click Delete. The trap address is deleted.
To edit a trap address, click Edit. The Trap Address Settings
screen appears.
99