About Alert Messages; Configuring Alert Messages - Intermec PA30 User Manual

Chapter 4 — Configuring Print Engine and Media Settings

About Alert Messages

Configuring Alert Messages

66
The PA30 firmware can send alert messages when certain
operating conditions or errors occur. You can use the web
browser interface to configure:
• the text for each alert message.
• the number of times the alert message is repeated.
• the amount of time or repeated errors that cause an alert
message to be repeated.
To configure alert message settings, see the next section.
You can also configure settings for the mail server where the alert
messages are sent. For more information, see
Settings" on page 68.
1 Open a web browser interface to the PA30. For help, see
"Using the Web Browser Interface" on page 30.
2 From the menu, click Printer > Alerts. The Configuration
[Alerts] screen appears:
The Alerts screen shows a list of printer alert messages. Some
alert messages are sent when the error occurs, and some alert
messages are not sent until a PRINTFEED command is
executed. For more information on alert messages, see the
next table.
"Configuring Mail
PA30 Print Engine User's Manual