Feed Adjust Settings; Media Size And Media Type Settings; Print Define Settings - Intermec PA30 User Manual

Chapter 5 — Using Setup Mode
80
For more information on these settings, see
Descriptions" on page 53.
Note: You cannot change wireless network settings or security
settings in Setup mode. For more information, see
Wireless Network Settings" on page 58.

Feed Adjust Settings

• Start adjust
• Stop adjust
For more information, see
page 64.

Media Size and Media Type Settings

• Xstart
• Width
• Length
• Media type
• Paper type, including specific settings for thermal transfer and
direct thermal printing
• Contrast
• Testfeed (Read-only)
• Testfeed mode
• Len (slow mode)
For more information on these settings, see
Settings" on page 75.

Print Define Settings

• Print speed and clip default. For more information on these
settings, see "Print Engine Settings Descriptions" on
page 65.
• Testprint, which chooses the default test label. Press Enter to
print the selected test label. For more information on test
labels, see "Printing Test Labels and Setup Information" on
page 96.
• LSS test, which sets the label stop sensor mode. For more
information, see "Testing the Label Stop Sensor" on page 29.
"TCP/IP Settings
"About Print Engine Settings" on
"Configuring Media
PA30 Print Engine User's Manual
"Configuring