Installing The Pa30; Physical And Environmental Requirements - Intermec PA30 User Manual

Installing the PA30

Physical and Environmental Requirements

PA30 Print Engine User's Manual
Intermec also provides these preprogrammed CompactFlash
cards:
• Font Cards provide additional fonts that can be used as long
as the card remains installed in the print engine.
• Font Install Cards permanently install additional fonts in the
print engine, which can be used after the card is removed.
For more information on these accessories, contact your Intermec
sales representative.
This section explains how to install the PA30 in an applicator
system and includes dimensioned illustrations.
The PA30 can be mounted in a label applicator with the required
mounting area and standard five-bolt opening.
Be sure that the mounting location:
• provides adequate clearance for the PA30 and for connecting
cables to the rear panel ports.
• is mechanically stable.
The temperature and humidity in the mounting location must be
within the following specifications.
PA30 Environmental Requirements
Type
Operating temperature
Humidity
The next illustrations show the PA30 dimensions so you can
verify how much space is required to install the PA30.
Chapter 1 — Learning About the PA30
Range
5°C to 40°C (41°C to 104°F)
10% to 90% non-condensing
9