Installing Easylan Wireless - Intermec EasyCoder 3400e Quick Start Manual

Understanding the EasyLAN Wireless LEDs
LED Description
Orange Stays on when the printer is powered on. Blinks to
indicate an error.
Green and Provides information for the power-up diagnostic and
Yellow network activity:
Green Yellow
Off Off
Off On
Off Blink
On Off
Blink Off
On On
Blink Blink

Installing EasyLAN Wireless

When you first consider installing EasyLAN Wireless printers in
your data collection network, you should arrange for a site
survey. An Intermec representative analyzes the range of radio
frequency devices in your facility and determines the placement
of the access points and printers with EasyLAN Wireless. The
site survey ensures that the coverage overlaps to provide
uninterrupted wireless communication at any location within
your building. This guide assumes that a site survey is complete
and the wireless network is installed in your facility.
This guide also assumes that you have loaded media and ribbon
into the printer and connected the printer to power. For help,
see the printer quick start guide.
If you are simply using the printer with EasyLAN Wireless in an
ad-hoc network, make sure that your PCs with 802.11b radios
are configured.
10
Indicates
Network not active
Reserved
Reserved
Reserved
Reserved
Wireless network active
Wireless network data received
EasyLAN Wireless Quick Start Guide