Unit Persistence; Additional Pro2 Resources - Server Technology PRO2 Switched POPS C2WG12BM User Manual

The module and its connection are illustrated as follows:
Multi-Linking Module
Getting Started
The optional Star Linking feature is sold as a separate kit purchased from Server Technology. To use the feature,
contact your sales representative to order the PRO2 Multi-Linking Module Kit, part number KIT-PRO2LINK-01M.
The kit contains:
• 1 link module (labeled to show the 2
2 linking cables, (21 ft.) 6.4 m
•

Unit Persistence

Unit Persistence is an internal PRO2 feature that works as follows:
If a link unit is connected to a master unit, and the link unit is disconnected (powered down or accidentally
disconnected), and the master unit is restarted, the link unit will be reported as "Not Found" after the restart
because the link unit is no longer physically connected to the master.
However, the association between the master/link units is retained to allow the continuation of alerts. If the
disconnected link unit is physically re-connected to the master, the "Not Found" status will return to "Normal" status.
To intentionally remove a link unit from connection with a master unit, the link unit must be purged using the Purge
function.
Unit persistence affects all connected PRO2 master/link units whether or not they are connected in a multi-
linking configuration.

Additional PRO2 Resources

For more information about the PRO2, including available product models and an introductory product video, see
Server Technology's Uptime Solutions page:
http://www.servertech.com/solutions/uptime-solutions
Introducing the PRO2
Connection to Bluetooth
nd and 3 rd link unit)
Smart PRO2 – User Guide
Module Port
®
•
9