Server Technology PRO2 Switched POPS C2WG12BM User Manual page 129

Displaying the Submenus
To view submenus of valid options for a command, type the main command and press Enter:
Example:
Smart PDU: set
'set' menu options:
access banner bluetooth
energywise feature
location net ocp
ssh syslog tacacs
Example::
Smart PDU: show
'show' menu options:
access bluetooth
ftp ldap lines loadshed
radius sensors snmp
Command Syntax Notes
The following conventions apply to the command syntax shown in the Command Details section:
[argument] mandatory argument that is not prompted for.
[argument] optional argument that is not prompted for.
<argument> argument that will be prompted for if not specified on the command line.
{argument} argument that can only be prompted for.
Example (set access command):
set access
Command Syntax
Using the Command Line Interface (CLI)
branch config
ftp http https ipv4
outlet phase port
tacpriv telnet trend
branches config cords
log network
sntp syslog system
Sets user access configurations.
set access button [disabled | enabled]
set access clitimeout <value>
set access logorder [newest | oldest]
set access method [localonly | ldaponly | ldaplocal | radiusonly | radiuslocal |
tacacsonly | tacacslocal]
set access prompt <prompt string>
set access strongpw [optional | required]
set access webloglen <value>
set access webtimeout <value>
Smart PRO2 – User Guide
cord dhcp dns email
ipv6 ldap ldapgroup
radius sensor snmp sntp
unit ups user
email energywise features
ocps outlets phases
tacacs trend units
line
spm
ports
ups
•
129