Download Print this page

Server Technology PRO2 Switched POPS C2WG12BM User Manual page 170

Advertisement

set tacacs
Command Syntax
Parameters
Command Access
set tacpriv
Command Syntax
Parameters
Sub-Parameters
Command Access
Using the Command Line Interface (CLI)
Sets TACACS+ server configuration values.
set tacacs primary <hostname>
set tacacs secondary <hostname>
set tacacs port <port>
set tacacs key {key}
The set tacacs command uses the following parameters:
primary
Sets the first TACACS+ server (0-63 characters).
secondary
Sets the second TACACS+ server (0-63 characters).
port
Sets the port for the TACACS+ servers 1-65535 (default is 49).
key
Sets the key for authentication with the TACACS+ servers.
Admin level only; no access in Demo mode
Sets TACACS+ configuration values for privilege level access rights.
set tacpriv access [admin | poweruser | user ] <priv level>
set tacpriv sysmon [disabled | enabled] <priv level>
The set tacpriv command uses the following parameters:
access
Sets the access type for a level.
sysmon
Sets the system monitor access for a level.
The set tacpriv command uses the following sub-parameter:
priv level
The ID of the TACACS+ privilege level to change access rights (0-15).
Admin level only
Smart PRO2 – User Guide
170

Advertisement

loading
Need help?

Need help?

Do you have a question about the PRO2 Switched POPS C2WG12BM and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Switched pro2Pro2 smart/switched c2w48cePro1 switched pops c1wg-24vd/yPro2 hdotPro2 switched pops