Server Technology PRO2 Switched POPS C2WG12BM User Manual page 165

set sensor
Command Syntax
Parameters
Using the Command Line Interface (CLI)
Sets sensor configuration values.
set sensor adc [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set sensor adc email [disabled | enabled] <name | id | ALL>
set sensor adc hyst <value>
set sensor adc name <name | id> <name>
set sensor adc snmpt [disabled | enabled] <name | id | ALL>
set sensor contact email [disabled | enabled] <name | id | ALL>
set sensor contact name <name | id> <name>
set sensor contact snmpt [disabled | enabled] <name | id | ALL>
set sensor humid [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set sensor humid email [disabled | enabled] <name | id | ALL>
set sensor humid hyst <value>
set sensor humid name <name | id> <name>
set sensor humid snmpt [disabled | enabled] <name | id | ALL>
set sensor temp [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set sensor temp email [disabled | enabled] <name | id | ALL>
set sensor temp hyst <value>
set sensor temp name <name | id> <name>
set sensor temp snmpt [disabled | enabled] <name | id | ALL>
set sensor water email [disabled | enabled] <name | id | ALL>
set sensor water name <name | id> <name>
set sensor water snmpt [disabled | enabled] <name | id | ALL>
set sensor temp scale [celsius | fahrenheit]
The set sensor command uses the following parameters:
adc Sets the analog-to-digital converter sensor. min 0, max 255, hyst 0-20
(default 1).
contact Sets the contact closure sensor.
humid Sets the humidity sensor. min 0%RH, max 100%RH, hyst 0-20%RH
(default 2%RH).
temp Sets temperature sensor. For Celsius: min -40°, max 123°, hyst 0-30°,
default 1°; For Fahrenheit: min -40°, max 253°, hyst 0-54°, default 2°.
water Sets the water sensor.
email Sets the email notifications for sensor events.
hyst Sets the hysteresis between event state and recovery.
name Sets the name of the sensor.
snmpt SNMP trap notifications for sensor events.
scale Sets temperature scale.
Smart PRO2 – User Guide
•
165