Server Technology PRO2 Switched POPS C2WG12BM User Manual page 168

set sntp
Command Syntax
Parameters
Sub-Parameters
Command Access
set spm
Command Syntax
Parameters
Command Access
Using the Command Line Interface (CLI)
Sets SNTP configuration values.
set sntp dst [disabled | enabled]
set sntp dst [end | start] <tz string>
set sntp gmtoffset <offset>
set sntp primary <hostname>
set sntp secondary <hostname>
The set sntp command uses the following parameters:
dst Sets to automatically adjust for Daylight Saving Time (DST).
gmtoffset Sets the adjustment from Coordinated Universal Time (UTC).
(-12 to 14). GMT Offset includes both extended hours and minutes, and
supports all standard international time zones from -12:59 to +14.59.
The GMT Offset can be set in minutes to accommodate partial-hour
time zones.
primary Sets the first SNTP server. 0-63 characters.
secondary Sets the second SNTP server. 0-63 characters.
The set sntp command uses the following sub-parameters:
end Date to end DST.
start Date to start DST.
Admin level only; no access in Demo mode
Sets Sentry Power Manager (SPM) access configuration values.
set spm [disabled | enabled]
set spm resetpw
The set spm command uses the following parameter:
resetpw Sets to reset SPM secure password back to default.
Admin level only; no access in Demo mode
Smart PRO2 – User Guide
•
168