Server Technology PRO2 Switched POPS C2WG12BM User Manual page 132

Command
password
ping
pstat
Remove Commands
remove group
remove ldapgroup
remove ups
remove user
restart
senstat
Set Commands
set access
set banner
set bluetooth
set branch
set cord
set dhcp
set dns
set email
set energywise
set feature
set ftp
set http
set https
set ipv4, set ipv6
Using the Command Line Interface (CLI)
Description
Changes the password for the current local user.
Tests the ability of the PRO2 to contact an IP address for another Ethernet-enabled device.
Displays the latest status and metrics for all phases in the system.
The Remove command group removes outlet groups, LDAP groups, UPS devices, and
local users from the system.
Removes an outlet group from the system.
Removes an LDAP group from the system.
Removes a UPS from the system.
Removes a local user from the system.
Restarts the system.
Displays the latest status and metrics for all sensors in the system.
The Set command group sets the configuration values for numerous system areas.
Sets user configuration access.
Sets the system banner that displays before a user authenticates a user session.
Sets Bluetooth ® configuration values.
Sets branch configuration values.
Sets cord configuration values.
Sets DHCP configuration values.
Sets Domain Name System (DNS) server configuration values.
Sets email configuration values.
Sets Cisco EnergyWise configuration values.
Enables new system features.
Sets FTP configuration values.
Sets HTTP configuration values.
Sets HTTPS configuration values.
Sets IPv4 and IPv6 configuration values.
Smart PRO2 – User Guide
•
132