Monitoring (Analyzing Metrics) - Server Technology PRO2 Switched POPS C2WG12BM User Manual

Monitoring (Analyzing Metrics)

The Monitoring section of the Web interface provides viewing of dynamically updated metrics for the PRO2
operational areas that have the highest power impact on the unit and the data center.
The design of the GUI monitoring pages follows the major areas in the hardware architecture of the PRO2,
providing a separate and detailed page for the overall status of units, cords, lines, OCPs, branches, outlets, groups,
and sensors.
Each system object for which a threshold can be configured – such as line current and phase voltage – has a
corresponding monitor page that displays up-to-the-minute power metrics.
Many metrics are presented on the pages in color-coded graphs for at-a-glance monitoring. A regular full-page
refresh dynamically updates theses details to reflect the current condition of the PRO2, providing the opportunity for
instant assessment and fast response to critical system issues.
Monitoring > Units
The Units page is a high-level quick reference for the PRO2 units in the network, identifying the connected
master/link units (and any connected external monitoring devices), the current LED display orientation of the PRO2
units, and the overall current operational status of all units and devices.
What to look for:
The operating status of all units (master and link) should be Normal (green). The Status field reports the overall
health of the units and their connectivity, not an exceeded user-defined threshold. Depending on a yellow or red
status message, basic troubleshooting will be needed to determine the best solution for the affected unit.
Smart PRO2 – User Guide
Using the Web Interface
•
34