Server Technology PRO2 Switched POPS C2WG12BM User Manual page 61

config.bak (or *.bak)
This configuration backup file (firmware version 8.0x or later), when uploaded, restores a PRO2 unit, including
network, SNTP, and FTP settings.
User-configuration values are restored, except:
DHCP/IP values in network settings
•
SNAP password
•
SNMP sysName (unless restoring to the same unit from which the backup came, based on NIC serial
•
number, in which case the sysName is restored)
User-loaded x-509 certificate and key
•
Factory-configuration values, for example NIC serial number and profile, are not backed up or restored.
•
Using the Web Interface
Smart PRO2 – User Guide
•
61