Server Technology PRO2 Switched POPS C2WG12BM User Manual page 134

Command
Show Commands
show access
show bluetooth
show branches
show cords
show email
show energywise
show features
show ftp
show ldap
show lines
show log
show network
show ocps
show outlets
show phases
show ports
show radius
show sensors
show shutdown
show snmp
show sntp
show syslog
show system
show tacacs
Using the Command Line Interface (CLI)
Description
The Show command group displays the current configuration values in the system.
Shows user access configuration values.
Shows Bluetooth configuration values.
Shows branch configuration values.
Shows cord configuration values.
Shows email configuration values.
Shows Cisco EnergyWise configuration values.
Shows the enabled system features.
Shows FTP configuration values.
Shows LDAP configuration values.
Shows line configuration values.
Shows the system event log.
Shows network configuration values.
Shows over-current protector (OCP) configuration values.
Shows outlet configuration values.
Shows phase configuration values.
Shows port configuration values.
Shows Radius server configuration values.
Shows sensor configuration values.
Shows outlet shutdown configuration values.
Shows SNMP configuration values.
Shows SNTP configuration values.
Shows Syslog configuration values.
Shows system uptime, firmware version, firmware build information, boot version, number of
active users, and location string.
Shows TACACS+ configuration values.
Smart PRO2 – User Guide
•
134