Show Network - Server Technology PRO2 Switched POPS C2WG12BM User Manual

show network

Command Syntax
Command Access
Example
Using the Command Line Interface (CLI)
Shows network configuration values.
show network
Admin level only
Smart PDU: show network
Network Configuration
State: Static IPv4
Link: Up
Speed: 100 Mbps
Ethernet MAC: 00-0A-9C-60-00-0A
AutoCfg IPv6: FE80::20A:9CFF:FE60:A/64
IPv4 Address: 10.1.2.205
IPv4 Gateway: 10.1.1.1
DNS1: 10.1.5.133
DNS2: 10.1.5.134
Static IPv4/IPv6 Settings
IPv6 Address: FD01::A01:305/64
IPv6 Gateway: FD01::A01:585
IPv4 Address: 10.1.2.205
IPv4 Gateway: 10.1.1.1
DNS1: 10.1.5.133
DNS2: 10.1.5.134
DHCP Settings
DHCP: disabled
FQDN: enabled [sentry-ffffff]
Boot Delay: disabled
Static Fallback: enabled
Network Services
FTP Server: enabled
FTP Updates: disabled
SSH: enabled
Telnet: enabled
HTTP: enabled
HTTPS: enabled
User Cert: enabled
SNMPv1/2: enabled
SNMPv3: disabled
SPM Access: enabled
Smart PRO2 – User Guide
Network:
Negotiation:
Duplex:
Subnet Mask:
Subnet Mask:
Port: 21
Port: 21
Port: 22 Auth:
Port: 23
Port: 80
Port: 443 Installed Cert: Factory
SSL User Certificates:
User Passphrase: <none>
Uploaded Files: None
Port: 161 TrapPort:
Port: 161 TrapPort:
IPv4 only
Auto
Full
255.255.0.0
255.255.0.0
Password, Kb-Int
enabled
162
162
•
181