Server Technology PRO2 Switched POPS C2WG12BM User Manual page 158

set ldap
Command Syntax
Parameters
Sub-Parameters
Command Access
Using the Command Line Interface (CLI)
Sets LDAP configuration values.
set ldap bind [simple | tls | md5]
set ldap binddn <distinguished name>
set ldap bindpw <password>
set ldap groupattr <group attribute>
set ldap groupsearch basedn <distinguished name>
set ldap groupsearch [disabled | enabled]
set ldap groupsearch useattr <user attribute>
set ldap primary <hostname>
set ldap secondary <hostname>
set ldap port <port>
set ldap userbasedn <distinguished name>
set ldap userfilter <filter>
The set ldap command uses the following parameters:
bind Sets the bind method for the LDAP server.
binddn Sets the distinguished name (DN) for the bind.
bindpw Sets the password for the bind.
groupattr Sets the user class distinguished name (DN) or names of groups a user
is a member of.
groupsearch Sets the bind to search groups for the username in addition to
searching the usernames for its list of group memberships.
hostname Sets the hostname of the Directory Services server.
port Sets the port number for the LDAP server. 1-65535 (default 389).
userbasedn Sets the base distinguished name (DN) for the username search at
login.
userfilter Sets the filter used for the username search at login.
The set ldap command uses the following sub-parameters:
simple Uses simple bind method.
tls Uses bind with TLS. (TLS version 1).
md5 Uses Digest MD5 bind.
basedn Base Distinguished Name (DN).
useattr Sets the user attribute to search for.
Admin level only; no access in Demo mode
Smart PRO2 – User Guide
•
158