Server Technology PRO2 Switched POPS C2WG12BM User Manual page 45

Temperature/Humidity Sensor Status
Status Description
Found The PRO2 found the sensor and connection is established.
Not Found On a fresh reboot, the PRO2 does not find a sensor.
Lost The connection to a previously found sensor is now lost.
No Comm Communication loss occurred due to a hardware issue (not loss of communication with the probes).
1
The ENV part of the sensor supports two temperature/humidity (T/H) probes as part of the master unit, two T/H probes
as part of the link unit, and the optional EMCU-1-18 (which can support two T/H probes, four contact-closure monitoring
points, and one water sensor). The "No Comm" sensor status is not loss of communication with the probes themselves.
Using the Web Interface
Smart PRO2 – User Guide
1
•
45