Remove Group; Remove Ldapgroup - Server Technology PRO2 Switched POPS C2WG12BM User Manual

ping
Command Syntax
Parameters
Command Access
pstat
Command Syntax
Command Access

remove group

Command Syntax
Command Access

remove ldapgroup

Command Syntax
Command Access
Using the Command Line Interface (CLI)
Tests the reachability of a host on the IP network.
ping <hostname>
The ping command uses the following parameter.
hostname Specifies the host to ping, 0-63 characters.
Any access level
Displays the latest status and metrics for all phases in the system.
pstat
System monitor access
Removes an outlet group from the system.
remove group <name>
Admin level only
Removes an LDAP group from the system.
remove ldapgroup <name>
Admin level only
Smart PRO2 – User Guide
•
146